PhotoI:
|
SPECIFICATION:
Steel pipe diameter:1/2"ã2"
Steel pipe thickness:0.7ã3.2㎜
Power:57.5
Speed of pipe making:120m/min Max
High-frequency Welder:100kw
|
|
| PhotoJ: |
| Model |
Width |
outer
diameter |
inside
diameter |
| GE200 TYPE |
10ã200m/m |
400ã800m/m |
200m/m以上 |
| GE300 TYPE |
20ã300m/m |
500ã1200m/m |
300m/m以上 |
| GE400 TYPE |
25ã400m/m |
600ã1400m/m |
400m/m以上 |
|
|
| PhotoK: |
A÷±¡
| 1.Transfering
Function: |
By using the conveyor to transfer the cutting materials to the
stacker, thus auto-stacking is done properly. |
| 2.Edge-trimming
Slider: |
An
Edge-trimming Slider can be operated by the foot-switch is Located
in front of the stacker, therefore, trimming could be carrying
out before stacking. |
| 3.Special
Treated Convering Belt: |
The
Conveying Belt with special wear-proof materials that makes
belt with excellent duration. |
| 4.Inverter: |
By adjusting
the potential meter, the speed of conveyor can be changed as
desired. |
| 5.Lifter: |
By using
the Hydrulic-powered Lifter, the falling distance of the cutting
materials from the conveyor can be reduced that keeps cutting
sheets from scratch. |
| 6.Carrier: |
The Lifter
which is mounted on a Power-controlled Carrier, that can be
moved back and forth for stacking different size of sheets. |
| 7.Photo
Probe: |
A Photo
Probe is used for controlling the height of Lifter so that the
height of stacking materials can also be controlled automatically. |
|
|
B-Support-type:
(AUTO-STACKER
FEATURES ) |
B-Support-type:
| 1.Supporting
Function: |
By means
of the Roller-Support, and it can be reached to the same height
as shearer , thus the falling sheets can be supported while
cutting is made in order that keeps the dimensions from distortion. |
| 2.Transfering
Function: |
By using the conveyor to transfer the cutting materials to the
stacker, thus auto-stacking is done properly. |
| 3.Edge-trimming
Slider: |
An
Edge-trimming Slider can be operated by the foot-switch is Located
in front of the stacker, therefore, trimming could be carrying
out before stacking. |
| 4.Special
Treated Convering Belt: |
The
Conveying Belt with special wear-proof materials that makes
belt with excellent duration. |
| 5.Inverter: |
By adjusting
the potential meter, the speed of conveyor can be changed as
desired. |
| 6.Lifter: |
By using
the Hydrulic-powered Lifter, the falling distance of the cutting
materials from the conveyor can be reduced that keeps cutting
sheets from scratch. |
| 7.Carrier: |
The Lifter
which is mounted on a Power-controlled Carrier, that can be
moved back and forth for stacking different size of sheets. |
| 8.Photo
Probe: |
A Photo
Probe is used for controlling the height of Lifter so that the
height of stacking materials can also be controlled automatically. |
|
 |
| PhotoM: |
| Model |
(Table) |
(loading weight) |
| GZ4810 |
4Ñ8(ft) |
10 Ton |
| GZ5110 |
5Ñ10(ft) |
10 Ton |
|
 |
| PhotoL: |
|
 |
|
